|
|
This set of 10 screw-on jugs have a comfortable usable surface designed for maximum comfort on any angle wall. The screw-on nature of these holds means no more looking for the perfect t-nut placement. Now you have all the power to install them right where you want them, every single time.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF Screw-On Installation PDF
Screw-O...
|
Escape |
EC30402 |
$55.05
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
This 51-hold starter pack is ideal for any climber looking to start a new wall or expand an existing wall. We specifically designed this set to give the variety you are looking for when starting a new wall. This is not a starter pack with just a bunch of small footholds. It has a range of small, medium, and large holds with beginner jugs, crimps, and pinches.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
51-Hold...
|
Escape |
EC39901 |
$298.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Beautifully sculpted mini-pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes. Smaller than the Incut Pinches 2 variation.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Simple ...
|
Escape |
EC39801 |
$33.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The return of the legendary Micro Jugs!
This set of 5 gently incut edges feature some of the mightiest tiny finger jugs around.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Micr...
|
Escape |
EC10901 |
$33.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Pure finger bliss on a steep wall. These deep incut Pockets are borderline jugs. Unlike many pockets currently on the market, the Dual Texture Pockets are both incredibly comfortable and safe. No tweaked tendons here. Each Pocket should be installed utilizing the set-screw hole due to the extreme amounts of force you'll be generating.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Pockets
|
Escape |
EC19500 |
$50.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The Dual Texture Jugs are a set of 8 finger buckets that're great for nearly any angle wall. With some of the slickest dual texture you've ever felt, the DT Jugs can be your footwork's worst enemy, but with comfortably rounded lips, these ergonomic bad-boys will always be your finger's best friend. Great for grades of all levels, but the DT Jugs really shine in the beginner to intermediate category. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Jugs
|
Escape |
EC10002 |
$85.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The right foothold in the right spot can make or break a route. There are few footholds on the market more aware of this fragile equilibrium than the Dual Texture Feet. Designed for incredibly technical foot placements, a unique feature of the DT Feet is that they are just big and ergonomic enough to double as really thin handholds. Doesn't matter how you use them though. A delicate foot or a thin crimp, the result is always the same: A whole lot of fun.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Feet
|
Escape |
EC10301 |
$46.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic Legacy Series. This pair of crescent moons don't just look great...they climb great. Doesn't matter where you put'em (slab, vert, steep), these holds are classics for a reason.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Moons
|
Escape |
EC10503 |
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
This line of dual-textured foot jibs is a sobering experience. Precision and trust are the names of the game with the Sober Feet. Whether it be on slab, vertical walls, or slightly overhung terrain, routesetters will love the ultra-technical sequences these jibs naturally force. (Installs with flat head bolts) All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Sobe...
|
Escape |
EC19400 |
$36.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Is it a crimp? Is it a pinch? Can't say for certain. What we do know, however, is the DT Crimp Pinches are a solid addition to any wall. This highly functional set of 8 crimp-pinches each feature a precisely placed thumb catch to give you maximum gripping power. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Crim...
|
Escape |
EC19700 |
$46.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Edges, slopers, foot jibs, and more! This set of 40 screw-on climbing holds is the perfect compliment to any arete, volume, or slab. With the ability to screw them on the wall anywhere you please, the options are truly limitless.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF Screw-On Installation PDF
Screw-O...
|
Escape |
EC30403 |
$78.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic Legacy Series. Slick, monodirectional ledges that'll challenge your forearms at any angle.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Slop...
|
Escape |
EC10605 |
$86.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Gently rounded lips give this pack of 7 Legacy Comfy Edges the perfect home for fingers of all sizes. Perfect edges for any angle wall!
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Comf...
|
Escape |
EC10902 |
$49.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Your forearms better come ready for a workout, because the XXL Dual Texture Pinch is nearly 2 feet of thumb-squeezing-goodness. The band of dual texture running the length of the XXL Dual Texture Pinch guarantees there's no way to cheat your way through this bad-boy. Forcing movement has never been so easy? or fun. In the hands of a skilled routesetter, the XXL Dual Texture Pinch is great on any angle. Feeling particularly strong? Throw it on a steep overhang and put those forearms to work.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT XXL ...
|
Escape |
EC19900 |
$69.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Beautifully sculpted mini-pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes. Smaller than the Incut Pinches 2 variation.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Incu...
|
Escape |
EC11011 |
$49.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Sometimes all you need is a little crimp, a bit of dual texture, and a perfectly placed thumb catch. Thanks to their unique design, the Dual Texture Dot Crimps allow route setters to force specific, sequential movements without ever having to sacrifice yarding power. A must-have crimp for any route setter's bag.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Dot ...
|
Escape |
EC10202 |
$40.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Featuring our unique crater texture, this set of 8 finger-buckets are not only aesthetic but incredibly functional. Countless comfortable thumb catches litter the Crater Jug's usable surface, making this set great for beginner jug halls on slab and vert, or something a bit more treacherous on steeper walls. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Crater ...
|
Escape |
EC52007 |
$85.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic DT Series. The DT Medium Incut Ledges are the perfect blend of comfort, ergonomics, and functionality. A bread-and-butter hold for any routesetter's bucket.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Medi...
|
Escape |
EC10603 |
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Welcome to the world of hybrids. Featuring a unique sandstone texture, the Chicken Heads are a blend between crimp and pinch that forces climbers to think critically about how they plan to utilize the holds. A great set for competition climbing, or anytime you want to leave your climber scratching their head in consideration. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Sandsto...
|
Escape |
EC51001 |
$47.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Here at Escape we believe jugs should always be comfy. Never has that been more true than with the Simple Jugs. With unbeatable ergonomics and bomber grip, these jugs should come standard on every wall. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Simple ...
|
Escape |
EC30003 |
$79.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Doesn't matter where you put'em? vert, roof, and everything between... the XL Chickenhead Jugs are always a hero hold. Pure unbridled fun. These big ol' son-of-a-guns are some of the most popular holds in our line. Grab a set today to find out exactly why. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
XL Chic...
|
Escape |
EC51003 |
$123.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic Legacy Series. 6 positively incut edges that're an absolute blast on any angle wall.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Smal...
|
Escape |
EC10402 |
$48.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic Legacy Series. This set of 4 slots are perfect for slab and vert (or the steep if you're feeling particularly burly).
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Medi...
|
Escape |
EC10803 |
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic Legacy Series. The DT Medium Edges feature 3 finger-buckets that're great at any angle, and 2 slopey edges that're great for slab or vert...and downright heinous on the steep.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Medi...
|
Escape |
EC10403 |
$50.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
These deep, full-handed jugs are serious fun at any angle. Create beginner friendly adventures on slab and vertical walls, or something a bit spicier on a steep wall or roof. Each hold only has one usable cobblestone which minimizes matching and maximizes forced movement. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Cobbles...
|
Escape |
EC30503 |
$89.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The Sandstone Slot Jugs are the very definition of versatility. Ultra-comfortable jugs when set on a vertical wall a positive ledge when placed on a steep overhang; a killer compression slot when used in a roof. With the Sandstone Slot Jugs in your back pocket, the only thing holding you back is your creativity. Slap?em up on the wall and get ready for one fun sesh. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Sandsto...
|
Escape |
EC51006 |
$109.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Beautifully sculpted mini-pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Incu...
|
Escape |
EC11012 |
$79.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Though the usable surface of these 5 Small Ledges varies from flat to incut, the one thing they all share (besides some of the slickest dual texture around) is how much fun they are to set with. Forcing ergonomic movement has never been so easy.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Smal...
|
Escape |
EC10203 |
$48.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Textured on top. Smooth and silky on the bottom. Coming in at the size of a bowling ball, the Ball Sloper's simplicity, comfort, and ergonomics make it a must-have hold in any setter's arsenal. Perfect on slab and vert, but an absolute nightmare on anything steep.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Ball...
|
Escape |
EC10306 |
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic Moon. The big daddy Moon. The Legacy Moon XL just begs to be climbed on.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Moon XL
|
Escape |
EC10505 |
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
This set of 5 full-handed pinches are fantastic at any angle. The crater's unique dimpled texture makes for not only an aesthetic hold but a functional one. Marvel at the thousands of different ways your fingers and thumb can nestle in the cratered grooves. The Crater Pinches are fun at any angle. Throw them on a slab as a juggy ledge or on a steep overhang for a true forearm blasting squeeze test. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Crater ...
|
Escape |
EC52008 |
$109.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The Arrowhead Crimps are a set of 12 screw-on crimps perfect for adding a little spice to any volume. Designed to engage the thumb, you'll have maximum power and control when yarding between these little crimpers. Perfect for slab, vert, or slightly overhung walls.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Screw-On Installation PDF
Arrowhe...
|
Escape |
EC30401 |
$38.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
-- SECTION --
We took our favorite jugs from the Friction simple texture line and put them all together making this 40 hold pack of jugs. Friction is known for its great line of jugs, and now its that much easier to shop in this best-of lineup. The pack ranges from finger buckets to larger one-handed bomber jugs.
Home Walls: A great starter pack for a kids wall or easy way to load up on positive hold for those moderate to beginner routes.
Gyms: Need more jugs to fill out your hold inventory? Loading up on Friction 40 Hold Jug Packs in a handful of colors is an easy way to fill out your hold inventory.
NOTE: All holds should be attached with appropriate length/type of bolts and all appropriate set screws. If you are uncertain what size you need, contact us or choose 'add bolts' at checkout.
Installation Guide PDF
Frictio...
|
Friction |
FR20999 |
$355.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The big brother to our popular chicken head set, this hold is just plain fun. The sandstone texture is positive enough for the steep terrain, and interesting enough for the slab. Regardless of where you set it, be prepared for a good time. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Sandsto...
|
Escape |
EC51002 |
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic Legacy Series. Bomber jugs wrapped in a gorgeous dual-texture shell that'll make you think carefully about your next foot placement.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Jug ...
|
Escape |
EC10606 |
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
These little devils are dual-textured to perfection, making them just good enough to get the tip of your toe in or just a finger or two on the slabby stuff.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Bell...
|
Escape |
EC10701 |
$45.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
This set of 5 gently incut edges feature one of the most comfortable rounded edges imaginable. Perfect at any angle, but these edges really shine on vertical to slightly overhung angles.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Comf...
|
Escape |
EC10903 |
$68.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Force movement like never before with the return of the epic Legacy Series. These 4 Edges ranging from incut to slopey can't be beat when it comes to forcing technical, balancy movement. Then again, if you're feeling real strong, throw'em on a 45 and see what your forearms are made of.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Larg...
|
Escape |
EC10404 |
$52.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Micro Pinches for Macro fun! Great at any angle, but these little beauties really shine on vert and slab!
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Micr...
|
Escape |
EC11001 |
$36.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Frustrated at the lack of foot options to prepare climbers for the precision of many outdoor climbs, Kris from Power Company Climbing asked to team up with us to fill that void. https://www.powercompanyclimbing.com/
This set of feet, designed for 40 to 55 degree walls, are shaped specifically to force useful foot positions and precision that we don't often encounter indoors.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF Screw-On Installation PDF
Inducto...
|
Escape |
EC19206 |
$51.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The Dual Texture Sloper can be either a massive pinch or a full-handed sloper (depending on your particular paw size), but the one thing it always is...is fun. A thin strip of dual texture runs the perimeter of the DT Sloper, giving you (the route setter) ultimate control when forcing tenuous footwork. The DT Sloper's versatility makes it shine at any angle. Whether as a solid jug on a slab, or a ferocious sloper on an overhang, the DT Sloper is a route setter's dream. Pick one up today to find out why.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Sloper
|
Escape |
EC10105 |
$69.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Small, simple, fun. Everything you need, nothing you don?t. 3 of the Simple Crimps feature full pad edges while the other 3 only allow for half pad contact. Bread and butter holds that every routesetter should have in their bucket. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Simple ...
|
Escape |
EC30201 |
$38.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
If not for the two textured thumb catches on this thing's silky underside, the Ball Sloper would an absolute nightmare to grab on any wall steeper than slab. With the thumb catches, though? Well, the Ball Sloper is in a league of its own. The dished upper is large enough for two hands, making this a surprisingly versatile hold regardless of grade and angle.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Dish...
|
Escape |
EC10305 |
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Beautifully sculpted mini-pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Incu...
|
Escape |
EC11013 |
$74.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The juggiest member of the Ball Sloper family, the Canyon Sloper is a versatile workhorse at any angle. Great for beginners on slab or vertical terrain, but a beast as the wall steepens. Slap it on a 45-degree wall and prepare for a workout. The dual texture bottom guarantees forced movement.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Cany...
|
Escape |
EC10304 |
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Tufas are some of the most unique shapes to form in nature. Their bulbous features make for incredible climbing experiences as you pinch your way up the wall. Now, thanks to the Sandstone Tufa, you don't have to fly halfway around the world to climb on these pinching marvels. This positive pinch is accessible to all ability levels. Set amazing boulders of all grades on walls of all shapes and angles. With the Sandstone Tufa in your bucket, the options are limitless.
Sandsto...
|
Escape |
EC51008 |
$69.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
These oversized pinches are going to put your pinching power to the test. Comfortable, fat, and always a challenge. A band of dual-texture down the spine combined with the Fat Pinches simple design makes for an incredibly functional hold that puts the power to force movement in the hands of the routesetter.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Fat ...
|
Escape |
EC19600 |
$119.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
Are you tired of grabbing jugs that bite into your tendons with hard, uncomfortable edges? With the Titan Jugs, those days are long gone. This set of 4 jugs were specifically designed with nice rounded lips for maximum comfort and maximum fun. Doesn't matter if they are on a vertical wall or 45-degree overhang, the Titan Jugs are always easy on the fingers.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Titan Jugs
|
Escape |
EC54001 |
$79.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The Slug is a big fat pinch with finger friendly grooves on each side that create a surprisingly positive hold regardless of what angle of wall it calls home.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Slug
|
Escape |
EC11004 |
$67.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
|
The Downclimb Jug!
All holds should be attached with socket head bolts and all available set screws.
Downcli...
|
Escape Climbing |
EC19301 |
$18.51
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
