|
The perfect introductory pack for your climbing wall
Includes crimps, jugs, pinches, and feet
Also great for gyms looking to fill out a color
Works for everybody from beginners to elite athletes
This 51-hold starter pack is ideal for any climber looking to start a new wall or expand an existing wall. We specifically designed this set to give the variety you are looking for when starting a new wall. This is not a starter pack with just a bunch of small footholds. It has a range of small, medium, and large holds with beginner jugs, crimps, and pinches.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
51-Hold Starter Pack (EC39901)
|
$298.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jug
Texture: Simple Texture
Number of Holds in Set: 1
An Engineered Downclimb Jug! The New Escape Arrow Downclimb Jug is engineered to provide the most hold for your money. It was designed and analyzed using CAD software then perfected by hand, creating a downclimb jug that everyone can benefit from.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Arrow Downclimb Jug (EC19302)
|
$19.52
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Screw-on Crimps
Texture: Simple
Difficulty: Advanced
Number of Holds in Set: 12
FREE USA SHIPPING
In-Stock Inventory Can Ship Immediately
The Arrowhead Crimps are a set of 12 screw-on crimps perfect for adding a little spice to any volume. Designed to engage the thumb, you'll have maximum power and control when yarding between these little crimpers. Perfect for slab, vert, or slightly overhung walls.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Screw-On Installation PDF
Arrowhead Crimps (EC30401)
|
$38.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jug
Texture: Dual Texture
Difficulty: Beginner
Number of Holds in Set: 1
FREE USA SHIPPING
Escape Downclimb Jug! Designed in collaboration with the Tonde and Ayo from the Bouldering Projects, every feature of the New Downclimb Jug has been carefully considered to provide the absolute best downclimbing experiences to climbers of all ability levels. Check out the video below to see just all the ways this Downclimb Jug rocks!
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Bouldering Project Do... (EC19301)
|
$18.52
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Cobblestone Feet (DH01201)
|
$34.49
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner-Intermediate
Number of Holds in Set: 5 FREE USA SHIPPING These deep, full-handed jugs are serious fun at any angle. Create beginner friendly adventures on slab and vertical walls, or something a bit spicier on a steep wall or roof. Each hold only has one usable cobblestone which minimizes matching and maximizes forced movement. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Cobblestone Jugs (EC30503)
|
$89.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Crater
Difficulty: Beginner-Intermediate
Number of Holds in Set: 8
FREE USA SHIPPING
Featuring our unique crater texture, this set of 8 finger-buckets are not only aesthetic but incredibly functional. Countless comfortable thumb catches litter the Crater Jug's usable surface, making this set great for beginner jug halls on slab and vert, or something a bit more treacherous on steeper walls. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Crater Jugs (EC52007)
|
$85.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Crater
Difficulty: Beginner-Advanced
Number of Holds in Set: 5
FREE USA SHIPPING
This set of 5 full-handed pinches are fantastic at any angle. The crater's unique dimpled texture makes for not only an aesthetic hold but a functional one. Marvel at the thousands of different ways your fingers and thumb can nestle in the cratered grooves. The Crater Pinches are fun at any angle. Throw them on a slab as a juggy ledge or on a steep overhang for a true forearm blasting squeeze test. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Crater Pinches (EC52008)
|
$109.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jug
Texture: Simple Texture
Number of Holds in Set: 1
The Downclimb Jug!
All holds should be attached with socket head bolts and all available set screws.
Downclimb Jug (EC19301)
|
$18.51
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper
Texture: Dual Texture
Difficulty: Intermediate-Advanced
Number of Holds: 1
Textured on top. Smooth and silky on the bottom. Coming in at the size of a bowling ball, the Ball Sloper's simplicity, comfort, and ergonomics make it a must-have hold in any setter's arsenal. Perfect on slab and vert, but an absolute nightmare on anything steep.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Ball Sloper (EC10306)
|
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimp/Pocket
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 7
FREE USA SHIPPING
These little devils are dual-textured to perfection, making them just good enough to get the tip of your toe in or just a finger or two on the slabby stuff.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Bellybuttons (EC10701)
|
$45.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds in Set: 1
The juggiest member of the Ball Sloper family, the Canyon Sloper is a versatile workhorse at any angle. Great for beginners on slab or vertical terrain, but a beast as the wall steepens. Slap it on a 45-degree wall and prepare for a workout. The dual texture bottom guarantees forced movement.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Canyon Sloper (EC10304)
|
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edge
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 7
FREE USA SHIPPING
Gently rounded lips give this pack of 7 Legacy Comfy Edges the perfect home for fingers of all sizes. Perfect edges for any angle wall!
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Comfy Edges 1 (EC10902)
|
$49.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
This set of 5 gently incut edges feature one of the most comfortable rounded edges imaginable. Perfect at any angle, but these edges really shine on vertical to slightly overhung angles.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Comfy Edges 2 (EC10903)
|
$68.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimp/Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds: 8
FREE SHIPPING IN USA
Is it a crimp? Is it a pinch? Can't say for certain. What we do know, however, is the DT Crimp Pinches are a solid addition to any wall. This highly functional set of 8 crimp-pinches each feature a precisely placed thumb catch to give you maximum gripping power. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Crimp Pinches (EC19700)
|
$46.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper/Pinch
Texture: Dual Texture
Difficulty: Intermediate-Advanced
Number of Holds in Set: 1
If not for the two textured thumb catches on this thing's silky underside, the Ball Sloper would an absolute nightmare to grab on any wall steeper than slab. With the thumb catches, though? Well, the Ball Sloper is in a league of its own. The dished upper is large enough for two hands, making this a surprisingly versatile hold regardless of grade and angle.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Dish Sloper (EC10305)
|
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds: 6
FREE SHIPPING IN USA
Sometimes all you need is a little crimp, a bit of dual texture, and a perfectly placed thumb catch. Thanks to their unique design, the Dual Texture Dot Crimps allow route setters to force specific, sequential movements without ever having to sacrifice yarding power. A must-have crimp for any route setter's bag.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Dot Crimps (EC10202)
|
$40.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate-Advanced
Number of Holds: 3
FREE SHIPPING IN USA
These oversized pinches are going to put your pinching power to the test. Comfortable, fat, and always a challenge. A band of dual-texture down the spine combined with the Fat Pinches simple design makes for an incredibly functional hold that puts the power to force movement in the hands of the routesetter.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Fat Pinches (EC19600)
|
$119.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds: 11
FREE SHIPPING IN USA
The right foothold in the right spot can make or break a route. There are few footholds on the market more aware of this fragile equilibrium than the Dual Texture Feet. Designed for incredibly technical foot placements, a unique feature of the DT Feet is that they are just big and ergonomic enough to double as really thin handholds. Doesn't matter how you use them though. A delicate foot or a thin crimp, the result is always the same: A whole lot of fun.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Feet (EC10301)
|
$46.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jug
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds in Set: 1
FREE USA SHIPPING
Ergonomics to the max! Now THAT'S a jug!, Deep, incut jug perfect at any angle and good for all ability levels.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Flake (EC10904)
|
$74.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Hueco
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
Beautiful Hueco with comfortable edges, Perfect all the way up to totally overhanging. A secret pocket jug hides behind the shiny veneer of this incut hueco!
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Hueco (EC10704)
|
$66.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
Beautifully sculpted mini-pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes. Smaller than the Incut Pinches 2 variation.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Incut Pinches 1 (EC11011)
|
$49.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
Beautifully sculpted mini-pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Incut Pinches 2 (EC11012)
|
$79.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate
Number of Holds in Set: 4
FREE USA SHIPPING
Beautifully sculpted mini-pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Incut Pinches 3 (EC11013)
|
$74.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 6
FREE USA SHIPPING
Beautifully sculpted large pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes. With the incut nature these pines make fun easy climbing on low angle walls, and fun pumpy climbing on the steep walls.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Incut Pinches 4 (EC11014)
|
$173.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jug
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds in Set: 2
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. Bomber jugs wrapped in a gorgeous dual-texture shell that'll make you think carefully about your next foot placement.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Jug Ledges (EC10606)
|
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Finger Buckets
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds in Set: 8
FREE USA SHIPPING
The Dual Texture Jugs are a set of 8 finger buckets that're great for nearly any angle wall. With some of the slickest dual texture you've ever felt, the DT Jugs can be your footwork's worst enemy, but with comfortably rounded lips, these ergonomic bad-boys will always be your finger's best friend. Great for grades of all levels, but the DT Jugs really shine in the beginner to intermediate category. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Jugs (EC10002)
|
$85.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 4
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. These 4 Edges ranging from incut to slopey can't be beat when it comes to forcing technical, balancy movement. Then again, if you're feeling real strong, throw'em on a 45 and see what your forearms are made of.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Large Edges (EC10404)
|
$52.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Ledge
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 2
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. Positive ledges perfect for forcing movement at almost any grade, at any angle. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Large Incut Ledges (EC10604)
|
$85.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Ledge
Texture: Dual Texture
Difficulty: Beginner-Advanced
Number of Holds: 2
FREE SHIPPING IN USA
The Large Ledges are the routesetters answer to forcing delicate hand matching, without squishing any fingers. The long, flat usable surface is a comfortable jug on slab, or wicked ledge on steep. For routesetters who love to force movement, you'll love the slick dual texture coating the bottom of these ledges. Grab the Large Ledges and start creating uncheatable movement today!
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Large Ledges (EC10205)
|
$72.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Ledge
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds: 3
FREE SHIPPING IN USA
The Dual Texture Ledges are one of our most popular sets. This trio of ledges offers a little bit of everything. One ledge features a flat surface, while the other two are so incut that they're borderline jugs. Each Ledge sports our signature thumb catch built into the slick dual texture surface which gives you just that little extra bit of security when yarding between holds. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Ledges (EC10204)
|
$73.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges/Finger Buckets
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. The DT Medium Edges feature 3 finger-buckets that're great at any angle, and 2 slopey edges that're great for slab or vert...and downright heinous on the steep.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Medium Edges (EC10403)
|
$50.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Ledge
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 3
FREE USA SHIPPING
Force movement like never before with the return of the epic DT Series. The DT Medium Incut Ledges are the perfect blend of comfort, ergonomics, and functionality. A bread-and-butter hold for any routesetter's bucket.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Medium Incut Ledges (EC10603)
|
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 4
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. This set of 4 slots are perfect for slab and vert (or the steep if you're feeling particularly burly).
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Medium Slots (EC10803)
|
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Finger-Bucket
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
The return of the legendary Micro Jugs!
This set of 5 gently incut edges feature some of the mightiest tiny finger jugs around.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Micro Jugs (EC10901)
|
$33.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
Micro Pinches for Macro fun! Great at any angle, but these little beauties really shine on vert and slab!
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Micro Pinches (EC11001)
|
$36.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
Force movement like never before with the return of the epic Moon. The big daddy Moon. The Legacy Moon XL just begs to be climbed on.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Moon XL (EC10505)
|
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 2
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. This pair of crescent moons don't just look great...they climb great. Doesn't matter where you put'em (slab, vert, steep), these holds are classics for a reason.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Moons (EC10503)
|
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 4
FREE USA SHIPPING
Master your pinching power Dual-Texture to optimize setting Redefining the very definition of a Comfy Pinch. A stellar set of 4.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Pinches 2 (EC11002)
|
$47.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Hueco
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
Pinches. Are. Awesome Redefining the very definition of a Comfy Pinch. A stellar set of 4.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Pinches 3 (EC11003)
|
$74.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pockets
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds in Set: 5
FREE USA SHIPPING
Pure finger bliss on a steep wall. These deep incut Pockets are borderline jugs. Unlike many pockets currently on the market, the Dual Texture Pockets are both incredibly comfortable and safe. No tweaked tendons here. Each Pocket should be installed utilizing the set-screw hole due to the extreme amounts of force you'll be generating.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Pockets (EC19500)
|
$50.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Hueco
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
This big Hueco is a dream to climb on from anything from slab to steep! With good edges and a secret jug hiding in its depths, it's the go-to move for many setters across the globe.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF Screw-On Installation PDF
DT Screw-on Hueco (EC10703)
|
$188.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinches
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 6
FREE USA SHIPPING
Low profile rounded edges dual texture = the very definition of thin, technical, and oh so precise climbing. The Shallow Pinches are the secret weapon every routesetter needs to have in their back pocket when it comes to forcing high risk movement. Perfect for low angle walls, aretes, and volumes.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Shallow Pinches (EC19800)
|
$81.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper/Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
The Dual Texture Sloper can be either a massive pinch or a full-handed sloper (depending on your particular paw size), but the one thing it always is...is fun. A thin strip of dual texture runs the perimeter of the DT Sloper, giving you (the route setter) ultimate control when forcing tenuous footwork. The DT Sloper's versatility makes it shine at any angle. Whether as a solid jug on a slab, or a ferocious sloper on an overhang, the DT Sloper is a route setter's dream. Pick one up today to find out why.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Sloper (EC10105)
|
$69.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 4
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. Slick, monodirectional ledges that'll challenge your forearms at any angle.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Sloper Ledges (EC10605)
|
$86.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slot
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. Jugs on one side, sloping edge on the other. A gorgeously sculpted mono-directional hold that'll have you coming back again and again.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Slot XL (EC10805)
|
$82.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
The Slug is a big fat pinch with finger friendly grooves on each side that create a surprisingly positive hold regardless of what angle of wall it calls home.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Slug (EC11004)
|
$67.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 6
FREE USA SHIPPING
Force movement like never before with the return of the epic Legacy Series. 6 positively incut edges that're an absolute blast on any angle wall.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Small Edges (EC10402)
|
$48.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
In-Stock Inventory Can Ship Immediately
Though the usable surface of these 5 Small Ledges varies from flat to incut, the one thing they all share (besides some of the slickest dual texture around) is how much fun they are to set with. Forcing ergonomic movement has never been so easy.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Small Ledges (EC10203)
|
$48.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Foot Jibs
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 10
FREE USA SHIPPING
This line of dual-textured foot jibs is a sobering experience. Precision and trust are the names of the game with the Sober Feet. Whether it be on slab, vertical walls, or slightly overhung terrain, routesetters will love the ultra-technical sequences these jibs naturally force. (Installs with flat head bolts) All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Sober Feet (EC19400)
|
$36.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Hueco
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
Basically three huecos for the price of one, A mix of jugs and pockets
The Legacy Triple Hueco is unlike any other hueco you've ever seen. Three distinct holes create countless possibilities for complex hand and foot movements.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT Triple Hueco (EC10706)
|
$130.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 10 Holds
Perfect for Competition-Style Bouldering Routes
Great Volume Add-ons
The DT Wafers have Neutral to Slopey Edges While the DT Wafers 2.0 are Neutral to Incut.
Installation Guide PDF
DT Wafers 2.0 Feet (KC50002)
|
$74.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 22 Holds
Perfect for Competition-Style Bouldering Feet
Great Volume Add-ons
The DT Wafers have Neutral to Slopey Edges While the DT Wafers 2.0 are Neutral to Incut.
Installation Guide PDF
DT Wafers 2.0 Jibs (KC50001)
|
$104.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 5 Holds
Perfect for Competition Style Bouldering Routes
Great For Hard Overhung Routes or Vertical Walls
The DT Wafers have Neutral to Slopey Edges While the DT Wafers 2.0 are Neutral to Incut. Shaped by Louie Anderson
Installation Guide PDF
DT Wafers 2.0 Medium (KC50004)
|
$83.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 5 Holds
Perfect for Competition-Style Bouldering Routes
Great For Hard Overhung Routes or Vertical Walls
The DT Wafers have Neutral to Slopey Edges While the DT Wafers 2.0 are Neutral to Incut.
Installation Guide PDF
DT Wafers 2.0 Small (KC50003)
|
$68.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 10 Holds
Perfect for Competition-Style Bouldering Routes
Great Volume Add-ons
The DT Wafers have Neutral to Slopey Edges While the DT Wafers 2.0 are Neutral to Incut.
Installation Guide PDF
DT Wafers Feet (KC49002)
|
$74.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 22 Holds
Perfect for Competition-Style Bouldering Feet
Great Volume Add-ons
The DT Wafers have Neutral to Slopey Edges While the DT Wafers 2.0 are Neutral to Incut.
Installation Guide PDF
DT Wafers Jibs (KC49001)
|
$104.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 5 Holds
Perfect for Competition-Style Bouldering Routes
Great for Vertical or Slab Walls
The DT Wafers have Neutral to Slopey Edges While the DT Wafers 2.0 are Neutral to Incut.
Installation Guide PDF
DT Wafers Medium (KC49004)
|
$83.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 5 Holds
Perfect for Competition-Style Bouldering Routes
Great for Vertical or Slab Walls
The DT Wafers have Neutral to Slopey Edges While the DT Wafers 2.0 are Neutral to Incut.
Installation Guide PDF
DT Wafers Small (KC49003)
|
$68.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: 2-Finger Pockets
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds in Set: 5
Its kind of like climbing on limestone without the fear that a spider is going to pop out of the next pocket! Some of the most comfortable pockets on the market, these things are DEEP! With full Dual-Texture on the outside and just enough friction inside the pocket, these holds are going to be the go-to pockets for comp setters around the world.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT XL Pockets 1 (EC19501)
|
$104.45
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: 3-Finger Pockets
Texture: Dual Texture
Difficulty: Beginner-Intermediate
Number of Holds in Set: 5
Its kind of like climbing on limestone without the fear that a spider is going to pop out of the next pocket! Some of the most comfortable pockets on the market, these things are DEEP! With full Dual-Texture on the outside and just enough friction inside the pocket, these holds are going to be the go-to pockets for comp setters around the world.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT XL Pockets 2 (EC19502)
|
$123.45
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Hueco
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
A gorgeous extra-large tear drop hueco that'll have you begging to find the secret jug spot!
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT XXL Hueco (EC10705)
|
$119.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
Your forearms better come ready for a workout, because the XXL Dual Texture Pinch is nearly 2 feet of thumb-squeezing-goodness. The band of dual texture running the length of the XXL Dual Texture Pinch guarantees there's no way to cheat your way through this bad-boy. Forcing movement has never been so easy? or fun. In the hands of a skilled routesetter, the XXL Dual Texture Pinch is great on any angle. Feeling particularly strong? Throw it on a steep overhang and put those forearms to work.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
DT XXL Pinch (EC19900)
|
$69.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Beginner-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
Feeling Squeezey? The DT XXL Wedge is the perfect way to force some fun movement, on anywhere from slab to 45 degree overhangs. With precise dual texture placement just around the edges, it provides a great pinch, that gets larger as you move up the hold. In the hands of any setter its a easy winner for a fun pinch on your route!
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT XXL Wedge (EC19901)
|
$75.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges
Texture: Dual Texture
Difficulty: Intermediate
Number of Holds: 2
FREE SHIPPING IN USA
Find some balance in your life with the Legacy Yin Yang, with a juggy hold and a slopey hold it makes the setting pleasing and aesthetic on every wall!
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
DT Yin Yang (EC11101)
|
$40.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Gritstone Feet (DH00502)
|
$36.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges, Pinches, Slopers
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 71
Gritstone Full Line (DH00599)
|
$984.43
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges/Slopers
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 4
Gritstone Large 1 (DH00507)
|
$53.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Intermediate - Advanced Climbers
Number Of Holds: 5
Gritstone Large 2 (DH00503)
|
$80.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 3
Gritstone Large 3 (DH00512)
|
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 3
Gritstone Large 4 (DH00511)
|
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 5
Gritstone Medium 1 (DH00504)
|
$47.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 5
Gritstone Medium 2 (DH00508)
|
$36.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 5
Gritstone Medium 3 (DH00509)
|
$46.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pockets
Texture: Simple
Difficulty: Advanced Climbers
Number Of Holds: 10
Gritstone Small 1 (DH00501)
|
$44.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Small Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Gritstone Small 2 (DH00514)
|
$120.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinches
Texture: Simple
Difficulty: Intermediate - Advanced Climbers
Number Of Holds: 3
Gritstone XL 1 (DH00510)
|
$70.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 2
Gritstone XL 2 (DH00506)
|
$69.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 4
Gritstone XL 3 (DH00515)
|
$149.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jug/Edge
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 1
Gritstone XXL 1 (DH00505)
|
$53.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jug
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 1
Gritstone XXL 2 (DH00513)
|
$58.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Screw-On
Wall Angle: Kickboard to 15 Degree
Difficulty: Expert
Number of Holds in Set: 20
FREE USA SHIPPING
In-Stock Inventory Can Ship Immediately
Frustrated at the lack of foot options to prepare climbers for the precision of many outdoor climbs, Kris from Power Company Climbing asked to team up with us to fill that void. https://www.powercompanyclimbing.com/
This set of feet, designed for kickboards to 15 degree walls, are shaped specifically to force useful foot positions and precision that we don't often encounter indoors
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF Screw-On Installation PDF
Inductor 10 Degree Fo... (EC19204)
|
$58.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Screw-On
Wall Angle: 20-35 Degree
Difficulty: Expert
Number of Holds in Set: 12
FREE USA SHIPPING
In-Stock Inventory Can Ship Immediately
Frustrated at the lack of foot options to prepare climbers for the precision of many outdoor climbs, Kris from Power Company Climbing asked to team up with us to fill that void. https://www.powercompanyclimbing.com/
This set of feet, designed for 20 to 35 degree walls, are shaped specifically to force useful foot positions and precision that we don't often encounter indoors.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF Screw-On Installation PDF
Inductor 20 Degree Fo... (EC19205)
|
$51.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Screw-On
Wall Angle: 40-55 degree walls
Difficulty: Expert
Number of Holds in Set: 12
FREE USA SHIPPING
In-Stock Inventory Can Ship Immediately
Frustrated at the lack of foot options to prepare climbers for the precision of many outdoor climbs, Kris from Power Company Climbing asked to team up with us to fill that void. https://www.powercompanyclimbing.com/
This set of feet, designed for 40 to 55 degree walls, are shaped specifically to force useful foot positions and precision that we don't often encounter indoors.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF Screw-On Installation PDF
Inductor 45 Degree Fo... (EC19206)
|
$51.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Screw-On
Wall Angle: 60+ degree walls
Difficulty: Expert
Number of Holds in Set: 12
FREE USA SHIPPING
In-Stock Inventory Can Ship Immediately
Frustrated at the lack of foot options prepare climbers for the precision of many outdoor climbs, Kris from Power Company Climbing asked to team up with us to fill that void. https://www.powercompanyclimbing.com/
This set of feet, designed for 60 degree and steeper walls, are shaped specifically to force useful foot positions and precision that we don't often encounter indoors.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Screw-On Installation PDF
Inductor 60 Degree Fo... (EC19207)
|
$51.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers
Texture: Nemesis
Difficulty: Beginner-Intermediate
Number of Holds in Set: 4
FREE USA SHIPPING
One of the original holds in the Escape lineup. A classic set of slopers featuring the dot texture on the sloper surface.
Nemesis Slopers (EC53003)
|
$64.55
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Incut Edges/Small Jugs
Texture: Sandstone
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
-- SECTION --
Featuring our signature sandstone texture, this set of five edges are the sorts of bread-and-butter incut crimps every route setter needs to have in their bucket. Performing well on a whole slew of angles, these finger buckets are easy on the tendons, but hard on the muscles. When comfort meets challenge, you have one wicked formula for getting strong. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
New Sandstone Edges (EC51011)
|
$31.81
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Screw-On
Texture: No Texture
Difficulty: Expert
Number of Holds in Set: 12
FREE USA SHIPPING
The Diodes are born through our collaboration with the Power Company and are shaped by Kris Hampton. Kris and the team at the Power Company are obsessed with making climbers better through training material, standard training plans, and custom training plans. The Diodes are shaped for climbers that need to train footwork around precision, and trust. For more info on the Power Company check out
https://www.powercompanyclimbing.com/
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF Screw-On Installation PDF
Power Co. Diodes (EC19101)
|
$51.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Screw-On
Texture: No Texture
Difficulty: Expert
Number of Holds in Set: 8
FREE USA SHIPPING
The Resistors are born through our collaboration with the Power Company and are shaped by Kris Hampton. Kris and the team at the Power Company are obsessed with making climbers better through training material, standard training plans, and custom training plans. The Resistors are shaped for climbers that need to train footwork around precision, and trust. For more info on the Power Company check out
https://www.powercompanyclimbing.com/
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Screw-On Installation PDF
Power Co. Resistors (EC19201)
|
$42.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Rivulets Feet (DH00201)
|
$35.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinches, Crimps
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 40
Rivulets Full Line (DH00299)
|
$454.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinches
Texture: Simple
Difficulty: Intermediate - Advanced Climbers
Number Of Holds: 4
Rivulets Large (DH00203)
|
$92.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinches
Texture: Simple
Difficulty: Beginner - Advanced Climbers
Number Of Holds: 4
Rivulets Medium (DH00205)
|
$74.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Simple
Difficulty: Intermediate - Advanced Climbers
Number Of Holds: 10
Rivulets Small 1 (DH00202)
|
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers/Crimps
Texture: Simple
Difficulty: Intermediate - Advanced Climbers
Number Of Holds: 10
Rivulets Small 2 (DH00204)
|
$89.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinches
Texture: Simple
Difficulty: Beginner - Advanced Climbers
Number Of Holds: 2
Rivulets XL (DH00206)
|
$101.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
For (-) or (+) on the tag please leave a note in your order cart.
Easy Route Setting Tags for your Gym
Color matched to your routes colors.
We set out to create a sustainable and aesthetic option for gyms to mark route grades. By making these tags out of climbing hold material, we can increase the durability and longevity as well as the aesthetic appearance of the wall. Designed with slick dual texture and a minimal extrusion from the wall, they are basically unusable for climbers, even on low angle slabs.
Route Tags (EC00024)
|
$4.99
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Chicken Heads (knobs)
Texture: Sandstone
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
Welcome to the world of hybrids. Featuring a unique sandstone texture, the Chicken Heads are a blend between crimp and pinch that forces climbers to think critically about how they plan to utilize the holds. A great set for competition climbing, or anytime you want to leave your climber scratching their head in consideration. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Sandstone Chicken Heads (EC51001)
|
$47.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 2
Sandstone Crimps 2 XL (DH00805)
|
$75.86
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs, Crimps, Edges
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 61
Includes Sandstone Feet 2 for the foot holds.
Sandstone Crimps Full... (DH00899)
|
$544.70
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edge
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 5
Sandstone Crimps Large 1 (DH00808)
|
$77.52
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 5
Sandstone Crimps Large 2 (DH00809)
|
$69.76
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Sandstone Crimps Medi... (DH00804)
|
$75.39
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 5
Sandstone Crimps Medi... (DH00802)
|
$36.85
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Simple
Difficulty: Intermediate-Advanced Climbers
Number Of Holds: 10
Sandstone Crimps Small 1 (DH00803)
|
$51.30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Sandstone Crimps Small 2 (DH00807)
|
$60.17
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 4
Sandstone Crimps XL (DH00806)
|
$97.85
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Incut Edges/Small Jugs
Texture: Sandstone
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
-- SECTION --
Featuring our signature sandstone texture, this set of five edges are the sorts of bread-and-butter incut crimps every route setter needs to have in their bucket. Performing well on a whole slew of angles, these finger buckets are easy on the tendons, but hard on the muscles. When comfort meets challenge, you have one wicked formula for getting strong. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF Installation Guide PDF
Sandstone Feet (EC51010)
|
$37.51
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Sandstone Feet 2 (DH00801)
|
$42.40
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Sandstone Feet 3 (DH01301)
|
$45.07
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Large Jugs
Texture: Sandstone
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
-- SECTION --
Featuring our signature sandstone texture, this set of five jugs are the sorts of bread-and-butter two handed jug every route setter needs to have in their bucket. Performing well on a whole slew of angles, especially the steep ones! These jugs are easy on the tendons, but hard on the muscles. When comfort meets challenge, you have one wicked formula for getting strong. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Sandstone Large Jugs (EC51014)
|
$94.51
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Medium Jugs
Texture: Sandstone
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
-- SECTION --
Featuring our signature sandstone texture, this set of five jugs are the sorts of bread-and-butter one handed jug every route setter needs to have in their bucket. Performing well on a whole slew of angles, these jugs are easy on the tendons, but hard on the muscles. When comfort meets challenge, you have one wicked formula for getting strong. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Sandstone Medium Jugs (EC51013)
|
$56.51
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Sandstone
Difficulty: Beginner-Intermediate
Number of Holds in Set: 5 FREE USA SHIPPING The Sandstone Slot Jugs are the very definition of versatility. Ultra-comfortable jugs when set on a vertical wall a positive ledge when placed on a steep overhang; a killer compression slot when used in a roof. With the Sandstone Slot Jugs in your back pocket, the only thing holding you back is your creativity. Slap?em up on the wall and get ready for one fun sesh. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Sandstone Slot Jugs (EC51006)
|
$109.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Small Jugs
Texture: Sandstone
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
-- SECTION --
Featuring our signature sandstone texture, this set of five jugs are the sorts of bread-and-butter incut crimps every route setter needs to have in their bucket. Performing well on a whole slew of angles, these jugs are easy on the tendons, but hard on the muscles. When comfort meets challenge, you have one wicked formula for getting strong. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Sandstone Small Jugs (EC51012)
|
$37.51
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Sandstone
Difficulty: Beginner-Expert
Number of Holds in Set: 1
FREE USA SHIPPING
Tufas are some of the most unique shapes to form in nature. Their bulbous features make for incredible climbing experiences as you pinch your way up the wall. Now, thanks to the Sandstone Tufa, you don't have to fly halfway around the world to climb on these pinching marvels. This positive pinch is accessible to all ability levels. Set amazing boulders of all grades on walls of all shapes and angles. With the Sandstone Tufa in your bucket, the options are limitless.
All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Sandstone Tufa (EC51008)
|
$69.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Chicken Head
Texture: Sandstone
Difficulty: Beginner-Intermediate
Number of Holds in Set: 1
FREE USA SHIPPING
The big brother to our popular chicken head set, this hold is just plain fun. The sandstone texture is positive enough for the steep terrain, and interesting enough for the slab. Regardless of where you set it, be prepared for a good time. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Sandstone XL Chicken ... (EC51002)
|
$61.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Foot Jibs
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 40
FREE USA SHIPPING
Edges, slopers, foot jibs, and more! This set of 40 screw-on climbing holds is the perfect compliment to any arete, volume, or slab. With the ability to screw them on the wall anywhere you please, the options are truly limitless.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF Screw-On Installation PDF
Screw-On 40 Pack (EC30403)
|
$78.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Finger Buckets
Texture: Simple
Difficulty: Beginner-Intermediate
Number of Holds in Set: 10
FREE USA SHIPPING
This set of 10 screw-on jugs have a comfortable usable surface designed for maximum comfort on any angle wall. The screw-on nature of these holds means no more looking for the perfect t-nut placement. Now you have all the power to install them right where you want them, every single time.
Using general construction screws, drywall screws, or any non-structural screw can be dangerous when installing climbing holds.
GRK #9 screws have a structural rating (#8 GRK do not) and are the only screws we recommend for installing climbing holds. Safely installing holds is important with precious hands pulling pulling on these plastic grips. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF Screw-On Installation PDF
Screw-On Jugs (EC30402)
|
$55.05
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloping Dish
Texture: Simple
Difficulty: Intermediate-Expert
Number of Holds in Set: 5
FREE USA SHIPPING
In-Stock Inventory Can Ship Immediately
The ultra low-profile of the Simple Bumps make them perfect on aretes, slab top-outs, or volumes. Truly challenging holds that even make for a challenging smeary foot.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Simple Bumps 1 (EC30102)
|
$81.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers/Edges
Texture: Simple
Difficulty: Intermediate-Advanced Climbers
Number Of Holds: 5
Simple Bumps 2 (DH00603)
|
$67.45
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Simple Bumps Feet 1 (DH00601)
|
$43.23
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Feet
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Simple Bumps Feet 2 (DH00701)
|
$43.23
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 53
Simple Bumps Full Line (DH00699)
|
$518.13
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers/Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 3
Simple Bumps Large (DH00605)
|
$84.55
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers/Edges
Texture: Simple
Difficulty: Intermediate-Advanced Climbers
Number Of Holds: 10
Simple Bumps Small 1 (DH00604)
|
$121.60
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers
Texture: Simple
Difficulty: Intermediate-Advanced Climbers
Number Of Holds: 10
Simple Bumps Small 2 (DH00602)
|
$76.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Crimps
Texture: Simple
Difficulty: Intermediate-Expert
Number of Holds in Set: 6 FREE USA SHIPPING Small, simple, fun. Everything you need, nothing you don?t. 3 of the Simple Crimps feature full pad edges while the other 3 only allow for half pad contact. Bread and butter holds that every routesetter should have in their bucket. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Simple Crimps (EC30201)
|
$38.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Edges
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Simple Edges 1 (DH00301)
|
$97.85
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 10
Simple Edges 2 (DH00302)
|
$124.45
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Dual Texture
Difficulty: Intermediate-Expert
Number of Holds in Set: 17
FREE USA SHIPPING
Beautifully sculpted mini-pinches with just the right amount of incut. Fluctuating from slightly positive to full jug, the Incut Pinches are a pure delight for hands of all sizes. Smaller than the Incut Pinches 2 variation.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Simple Feet (EC39801)
|
$33.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner
Number of Holds in Set: 4
FREE USA SHIPPING
Here at Escape we believe jugs should always be comfy. Never has that been more true than with the Simple Jugs. With unbeatable ergonomics and bomber grip, these jugs should come standard on every wall. All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
Simple Jugs (EC30003)
|
$79.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner-Intermediate
Number of Holds in Set: 4
FREE USA SHIPPING
Are you tired of grabbing jugs that bite into your tendons with hard, uncomfortable edges? With the Titan Jugs, those days are long gone. This set of 4 jugs were specifically designed with nice rounded lips for maximum comfort and maximum fun. Doesn't matter if they are on a vertical wall or 45-degree overhang, the Titan Jugs are always easy on the fingers.
All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
Titan Jugs (EC54001)
|
$79.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 10 Holds
Shaped by Tony Reynaldo
Carabiner not included
Click here for important info
Comfy and ergonomic on all angles, these jugs were named after the designer who shaped them. TUGS = Tony Jugs.
Installation Guide PDF
Tugs – Extra Small (KC21002)
|
$90.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 10 Holds
Shaped by Tony Reynaldo
Carabiner not included
Click here for important info
Comfy and ergonomic on all angles, these jugs were named after the designer who shaped them. TUGS = Tony Jugs.
Installation Guide PDF
Tugs – Feet (KC21001)
|
$74.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 50 Holds
Shaped by Tony Reynaldo
Carabiner not included
Click here for important info
Comfy and ergonomic on all angles, these jugs were named after the designer who shaped them. TUGS = Tony Jugs.
Installation Guide PDF
Tugs – Full Line (KC21999)
|
$580.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 10 Holds
Shaped by Tony Reynaldo
Carabiner not included
Click here for important info
Comfy and ergonomic on all angles, these jugs were named after the designer who shaped them. TUGS = Tony Jugs.
Installation Guide PDF
Tugs – Large (KC21005)
|
$185.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 10 Holds
Shaped by Tony Reynaldo
Carabiner not included
Click here for important info
Comfy and ergonomic on all angles, these jugs were named after the designer who shaped them. TUGS = Tony Jugs.
Installation Guide PDF
Tugs – Medium (KC21004)
|
$135.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Includes 10 Holds
Shaped by Tony Reynaldo
Carabiner not included
Clickhere for important info
Comfy and ergonomic on all angles, these jugs were named after the designer who shaped them. TUGS = Tony Jugs.
Installation Guide PDF
Tugs – Small (KC21003)
|
$100.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pockets, Slopers, Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 14
Warped Sandstone Full... (DH00499)
|
$593.75
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 5
Warped Sandstone Large 1 (DH00402)
|
$186.20
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 5
Warped Sandstone Medium (DH00403)
|
$93.10
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner - Intermediate Climbers
Number Of Holds: 2
Warped Sandstone XL (DH00404)
|
$120.65
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pockets
Texture: Simple
Difficulty: Intermediate-Advanced Climbers
Number Of Holds: 2
Warped Sandstone XXL (DH00401)
|
$193.80
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jug
Texture: Sandstone
Difficulty: Beginner-Intermediate
Number of Holds in Set: 3
FREE USA SHIPPING
Doesn't matter where you put'em? vert, roof, and everything between... the XL Chickenhead Jugs are always a hero hold. Pure unbridled fun. These big ol' son-of-a-guns are some of the most popular holds in our line. Grab a set today to find out exactly why. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
XL Chicken Head Jugs (EC51003)
|
$123.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Crater
Difficulty: Beginner-Advanced
Number of Holds in Set: 2
FREE USA SHIPPING
This set of 2 full-handed pinches are fantastic at any angle. This set of uniquely dimpled holds are designed as oversized pinches that turn into fun ledges as you rotate them. Perfect at any angle, from challenging overhangs to moderate slab. You can also purchase the whole XL Crater Set All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
XL Crater Pinches (EC52006)
|
$70.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Slopers
Texture: Crater
Difficulty: Intermediate-Expert
FREE USA SHIPPING
A fun, challenging sloper set with a hardy, yet comfortable grip pattern. Great for technical problems, volumes, and aretes. Not for the faint of heart. You'd better come prepared to try hard and have fun! All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
XL Crater Set (EC52005)
|
$251.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper
Texture: Crater
Difficulty: Intermediate-Expert
FREE USA SHIPPING
Coming in at 4" tall and 11" long, the XL Crater Sloper #1 is the Granddaddy of the XL Sloper Set. A challenging sloper with ample purchase thanks to its puckered surface. Hope you're feeling strong, because these guys gonna put up a fight. (Hold #1 of 4 in the XL Crater Set) All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
XL Crater Sloper #1 (EC52001)
|
$68.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper
Texture: Crater
Difficulty: Intermediate-Expert
FREE USA SHIPPING
A crazy challenging sloper no matter how you rotate it. The cratered texture offers just enough purchase for your fingers to really crank down on this sloping gem. If you're feeling really saucy, set the XL Crater Sloper #2 as a slopey pinch and make your forearms squeal. (Hold #2 of 4 in the XL Crater Set) All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
XL Crater Sloper #2 (EC52002)
|
$63.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper
Texture: Crater
Difficulty: Intermediate-Expert
FREE USA SHIPPING
A fun, challenging sloper with a complex of meticulously crafted puckers. A fairly positive hold that works equally well as a sloper or a large open-handed pinch. Wild fun at all sorts of angles. (Hold #3 of 4 in the XL Crater Set) All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
XL Crater Sloper #3 (EC52003)
|
$59.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Sloper
Texture: Crater
Difficulty: Intermediate-Expert
FREE USA SHIPPING
A fun, challenging sloper with a complex of meticulously crafted puckers. Great for technical problems, volumes, and aretes. Not for the faint of heart. You'd better come prepared to try hard. (Hold #4 of 4 in the XL Crater Set) All holds should be attached with socket head bolts and all available set screws.
Installation Guide PDF
XL Crater Sloper #4 (EC52004)
|
$57.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Jugs
Texture: Simple
Difficulty: Beginner
Number of Holds in Set: 4 FREE USA SHIPPING The comfiest jugs around. These oversized beasts are what happens when you give the Simple Jugs a steroid shot of awesome. The XL Simple Jugs will set the standard for ergonomics on any wall. Dynos, heel hooks, matches...whatever the occasion, the XL Simple Jugs are up to the task. Take?em for a spin today. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
XL Simple Jugs (EC30005)
|
$118.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|
|
Hold Type: Pinch
Texture: Simple
Difficulty: Beginner-Expert
Number of Holds in Set: 1 The ultimate oversized pinch. Functional to the max. Position it vertically for a rad tufa. Flip it horizontal for a juggy incut ledge. Long enough for multiple hand-foot matches, and incut enough to be a wild ride at any angle. All holds should be attached with socket head bolts and all available set screws. Installation Guide PDF
XL Simple Pinch (EC30305)
|
$71.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTS?
|