Best Price Guaranteed Ideal for Commercial Climbing Gyms Black Oxide Finish - Indoor Use 3/8-16 Socket Head Cap Screws (SHCS) Options 3/8-16 Flat Head Cap Screws Options We import the highest quality climbing bolts by the semi load giving you the absolute best price possible. Sourcing bolts for you is a simple way we can reduce your gym cost and keep more money in your hold budget! All bolts come threaded with 1.5" of thread. There’s nothing better for indoor use than Alloy Steel. These bolts are manufactured with a unique Cold-Forging technique that results in greater strength, higher fatigue resistance, and threads that last! Using high-quality bolts is critical if you want to get the longest life possible out of your t-nuts. Use Alloy Steel bolts indoors, and Stainless Steel if you’re outside in a high humidity area.   Pallet QuantitiesPallet discounts kick in on orders over 35 boxes. A $5 discount per box is applied. Contact orders@escapeclimbing.com for pallet orders and LTL shipments. FREE shipping still applies.  *Socket Head Cap Screw (SHCS) bolts are the standard head for all climbing holds and requires a 5/16 hex bit for installation.  *Flat Head Cap Screw bolts (also called martini head bolts) are typically used for installing foot holds and are less common yet prevalent in most gyms. A flat head bolt requires a 7/32 hex bit for installation.

Bulk Bolts For Gyms (HDAS015)

Industry Standard for Large Scale Climbing Gyms Self-guided barrel Available in 3/8-16 and M10 (international) sizing  16 KN test rating w/ oversized base for added strength Screws Included Other Industrial Options: Available in metric M10 (international threads) Available in 304 and 316 Stainless Steel for extra corrosion resistance Installation Guide PDF Screws included The Escape Industrial T-nut is the strongest and widest used T-nut on the market for climbing. It passes the EN 12572-1:2017 test in 18MM baltic birch plywood. The assembly is loaded using the test protocol up to 12 kN. Designed and sourced specifically for climbing walls, there’s nothing else on the market quite like the Escape Industrial T-nut. With a barrel longer than your standard T-nuts, the Industrial T-nut is designed for ¾” plywood or thicker. Perfect for commercial applications. Also, because of its unique self-guided barrel, stripped T-nuts are a thing of the past. Well, not entirely, (new setters will always find a way), but now they’ll really have to go out of their way to make it happen. The Industrial T-nuts huge winged-flange installs via 2 set screws which guarantee maximum strength and stability. To install this bad boy, use a ½” drill to make your T-nut holes. *Metric Industrial T-nuts are stock items and sell for the same price as the imperial thread.  Email orders@escapeclimbing.com to place an order. NOW AVAILABLE IN STAINLESS STEEL! 304 is the most common stainless steel (also known as A2 or 18-8). 316 is used for more severe corrosion conditions in pool areas and marine environments. 316 handles chlorides or general corrosion in acidic applications much better than 304 stainless steel.  It is a common misconception that stainless steel bolts or T-nuts are stronger than steel hardware. Stainless steel is in fact significantly weaker than hardened steel fasteners like our alloy bolts or zinc plated T-nuts. Zinc is an electroplated finish that gives T-nuts corrosion resistance while yet maintaining the strength of hardened steel. Stainless Steel T-nuts are not for every application. It is a softer metal and as a result more prone to stripping and cross-threading. However, if you need more corrosion resistance than a zinc plating can offer then look to stainless steel.  Pros 304 Stainless Steel  - More cost-effective - Great rust prevention on typical outdoor walls Pros 316 Stainless Steel  - underwater or exposed to water consistently  - greater strength and hardness when compared to 304 - resistance to a wider variety of environments 

Industrial Gym T-Nut (HDITNUT)